ATI Radeon 3000 Graphics 3D Mark Okay, technical Info, known issues and bugs

  3D Bench Mark OK

3D.Mark.Okay for Graphic-Card: ATI-Radeon-3000-Graphics

 1 12.48   Low  1024x768 0../img/icoGK/amd-ico.png  AMD Athlon(tm) II X2 250 Processor2x210.0.22631

ATI Radeon 3000 Graphics - Technical Information.

The ATI Radeon 3000 Graphics is an integrated graphics solution developed by AMD. Here is some technical information about this graphics unit:

1. Architecture:
The ATI Radeon 3000 Graphics is based on the Unified Video Decoder (UVD) 2.0 architecture, which offers improved video and graphics performance.

2. Process:
The graphics unit was manufactured using the 55nm process, which results in good performance while maintaining acceptable energy efficiency.

3. Shader Units:
The exact number of shader units may vary depending on the model, but is usually in the range of 40 to 120 shader units.

4. Memory:
The ATI Radeon 3000 Graphics normally uses the computer's system memory as graphics memory. This means that the graphics unit does not have dedicated VRAM and instead accesses the system's RAM.

5. Performance:
The performance of the ATI Radeon 3000 Graphics is sufficient for basic graphics tasks such as surfing the Internet, watching videos, and running non-demanding games. However, it is not suitable for high-end gaming or demanding graphics applications.

6. Supported Technologies:
The graphics unit supports DirectX 10.1, which ensures good compatibility with current games and applications. It also offers support for HD video playback and some older 3D technologies.

7. Connectors:
The outputs may vary depending on the motherboard variant, but typical connections are VGA, DVI and HDMI.

The ATI Radeon 3000 Graphics is usually integrated into motherboards and is often used in low-cost desktop computers or laptops that are not intended for demanding graphics applications.

ATI Radeon 3000 Graphics, known issues and bugs.

The ATI Radeon 3000 Graphics had some known issues and bugs, particularly related to driver stability and performance. Some of the commonly reported issues were:

1. Driver incompatibility:
The graphics unit may have had difficulty with some driver versions, especially older or less than optimally optimized drivers. This sometimes resulted in crashes, graphical errors, or performance issues.

2. Heating Issues:
Some ATI Radeon 3000 Graphics models have been reported to experience excessive heat, particularly when used in combination with poor airflow or under load. This could lead to unstable operating conditions or even hardware failure.

3. Performance Limitations:
The graphics unit was not designed for high-end gaming or demanding graphics applications. Therefore, performance degradation could occur when attempting to run such applications.

4. Compatibility Issues:
In some cases, compatibility issues have been reported with certain games or applications that may occur due to driver or hardware limitations.

5. Lack of support for newer technologies:
Due to the older architecture of the ATI Radeon 3000 Graphics, it may have lacked support for some newer graphics technologies or standards, which could result in compatibility or performance limitations.

To minimize these problems, it was advisable to install the latest available drivers, ensure adequate cooling, and only use the graphics unit for applications it was designed for. In some cases, BIOS or firmware updates could also help fix known issues or improve stability.
3D Bench Mark OK
  3D Bench Mark OK

3D Mark Okay GeForce-GT-430-PCIe-SSE2 and Infos
GeForce-GTX-1650-SUPER-PCIe-SSE2 Technical Information
3D Mark Okay GeForce-GTX-1060-PCIe-SSE2 and Infos
AMD-Radeon-HD-8570 Technical Information
3D Mark Okay NVIDIA-GeForce-RTX-2060-SUPER-PCIe-SSE2 and Infos
... Thanks